Mycosan One-Off Steelwratjes Bevriezing
50 ml
Click to enlarge
|
newEUR19.74
Recommended retail price
€ 21,99
Our price
€ 19,74 (3 units = free shipping within NL/BE/DE)
|
||||||||
Product information for Mycosan One-Off Steelwratjes Bevriezing:
Application of Mycosan One-Off Steelwratjes Bevriezing:
Removes skin tags at the root in one treatment by freezing*!✓Effective Precision Treatment: Practical to Use
✓Freezes skin tags at the root
✓Cryotherapy treatment: the natural removal process starts after the treatment
✓Includes skin protectors: does not damage surrounding skin, no direct contact between gas and skin
*If used according to the instructions. For larger, stubborn skin tags, repeat treatment may be necessary after two weeks.
Composition of Mycosan One-Off Steelwratjes Bevriezing:
1x Aerosol 50ml1 x activeerdop
12 x disposable foam applicators
3 x reusable skin protectors
Usage of Mycosan One-Off Steelwratjes Bevriezing:
1. Select the correct size skin protector for proper treatment. Place it around the base of the skin tag, ensuring that only the stalk of the skin tag is treated and the healthy surrounding skin remains protected.2. Place the foam attachment into the opening at the end of the applicator.
3. Hold the applicator vertically and place the activation cap, which has an ON-OFF safety system, on the nozzle so that it can only be activated in the ON position. To activate the nozzle, align the arrow on the plastic base of the nozzle with the vertical line marked "ON" on the activation cap.
4. Turn the aerosol upside down (with both the foam nozzle and the cap correctly in place) and place it with the bottom of the activating cap on a table. Hold the activating cap firmly with one hand and press down firmly with the other for 1 second. The foam nozzle will be saturated with cold liquid, and the device will be ready to treat the skin tag.
5. Hold the activation cap on the table with one hand and use the other hand to remove the canister, without turning the cap over.
6. Hold the applicator in your hand and gently place the tip of the foam applicator at the base of the skin tag (where it is attached to the skin).
IMPORTANT: To ensure the effectiveness of the treatment, maintain gentle pressure and ensure the applicator is in constant contact with the base of the stem for the entire 40 seconds required for the treatment.
7. Check that there is no liquid left in the cap and replace the safety cap. Make sure the vertical line marked "OFF" is aligned with the triangle on the plastic part on top of the applicator. Then gently press the cap back into place.
Warnings/Restrictions on Use
The skin on the treated area will turn white, and you may experience a slight pain and burning sensation. The treated area will remain sensitive and may itch slightly: these are normal aftereffects of the treatment. A small, invisible blister may develop a few days after the frostbite, which can be protected with a hydrocolloid plaster if necessary.
- Do not use Mycosan One-Off Skin Tags Freeze on skin tags on the face, eyebrows, eyes, mouth, nose, lips, ears, breasts, anus or genitals.
- For external use only
This products belongs to the category: Warts
Write your product review for 50 ml Mycosan One-Off Steelwratjes Bevriezing! here
There are no frequently asked questions for 50 ml Mycosan One-Off Steelwratjes Bevriezing.
| Bar code: | 8718309703158 |
